Pages with the fewest revisions

Showing below up to 50 results in range #1 to #50.

1. Thermostability PVC (1 revision)
2. Fracture Process Zone (1 revision)
3. Bierögel, Christian (1 revision)
4. Fracture Mirror (1 revision)
5. Strain Gauge (1 revision)
6. Heterogeneity (1 revision)
7. Deformation (1 revision)
8. Fatigue Crack Propagation Elastomers (1 revision)
9. Crack Opening (1 revision)
10. Surface Tension and Interfacial Tension (1 revision)
11. Crack Model according to DUGDALE (1 revision)
12. Quasi-static Test Methods (1 revision)
13. J-Integral Evaluation Methods (Overview) (1 revision)
14. ICIT – Extended Stop-Block Method (1 revision)
15. Plastics (1 revision)
16. ENF-Specimen (1 revision)
17. Ashing Method (1 revision)
18. Bend Test – Specimen Shapes (1 revision)
19. Polymer Testing (1 revision)
20. Strength (1 revision)
21. Composite Materials Testing (1 revision)
22. Hardness (1 revision)
23. Surface Energy (1 revision)
24. Hole Formation Films (1 revision)
25. Melt Volume-Flow Rate (1 revision)
26. Relaxation Plastics (1 revision)
27. Blumenauer, Horst (1 revision)
28. F-Scan Technique (1 revision)
29. Ultrasonic Immersion Bath Technique (1 revision)
30. Water Absorption (1 revision)
31. Tensile Strength (1 revision)
32. Altstädt, Volker (1 revision)
33. Material & Werkstoff (1 revision)
34. Pure Shear-Specimen (1 revision)
35. Bend Test – Test Influences (1 revision)
36. Sink Mark (1 revision)
37. Full Notch Creep Test (FNCT) (1 revision)
38. Energy Elasticity (1 revision)
39. Heat Resistance (1 revision)
40. Test Speed (1 revision)
41. Crack Model according to IRWIN and Mc CLINTOCK (1 revision)
42. Bend Test Compliance (1 revision)
43. Environmental-SEM (ESEM) (1 revision)
44. Crystallinity (1 revision)
45. Processing Shrinkage (1 revision)
46. Tracking (1 revision)
47. Particle-filled Thermoplastics (1 revision)
48. Calibration (1 revision)
49. Fracture (1 revision)
50. Measure (1 revision)