Oluschinski: Created page with "{{Language_sel|LANG=ger|ARTIKEL=Duroplaste}} {{PSM_Infobox}} Thermostes FORCETOC ==Explanation of terms== Thermosetting materials, also known as thermosets, duromers, or resins, are a subgroup of plastics that exhibit a high degree of three-dimensional cross-linking of the main chemical valence bonds. Due to this macromolecular structure, they are classified as glass-like and hard plastics. In term..."

2025-12-08T06:47:39Z

Created page with "{{Language_sel|LANG=ger|ARTIKEL=Duroplaste}} {{PSM_Infobox}} <span style="font-size:1.2em;font-weight:bold;">Thermostes</span> __FORCETOC__ ==Explanation of terms== Thermosetting materials, also known as thermosets, duromers, or resins, are a subgroup of plastics that exhibit a high degree of three-dimensional cross-linking of the main chemical valence bonds. Due to this macromolecular structure, they are classified as glass-like and hard plastics. In term..."

New page

{{Language_sel|LANG=ger|ARTIKEL=Duroplaste}}
{{PSM_Infobox}}
<span style="font-size:1.2em;font-weight:bold;">Thermostes</span>
__FORCETOC__

==Explanation of terms==

Thermosetting materials, also known as thermosets, duromers, or resins, are a subgroup of [[Plastics|plastics]] that exhibit a high degree of three-dimensional cross-linking of the main chemical valence bonds. Due to this macromolecular structure, they are classified as glass-like and hard plastics. In terms of recyclability, a key feature is that, just like [[Elastomers|elastomers]], they cannot be deformed or melted under the influence of heat after [[Curing|curing]] or [[Cross-linking Elastomers|cross-linking]] and are decomposed or combusted by pyrolysis above their decomposition temperature.

==Macroscopic properties==

The macroscopic energy-elastic properties are characterized, for example, by high [[Tensile Strength|tensile strengths]] and [[Elastic Modulus|moduli of elasticity]], very low elongation at break (see: [[Tensile Strength|tensile strength]]), and low impact strengths (see also: [[Toughness|toughness]]). The term “brittle materials” is often used for classification purposes, although the term “[[Plastics|plastics]] with low [[Ductility Plastics|ductility]]” would be more accurate. Classification is often based on elongation at break, which is less than 10 % for these materials, and in most cases significantly below this limit. These plastics often react to mechanical or mechanical-thermal [[Stress|stresses]] with [[Crack Initiation|crack initiation]] and brittle failure (see: [[Fracture Types|fracture types]]), in some cases also exhibiting a high tendency to shrinkage (see also: [[Shrinkage Test|shrinkage test]]). Due to the partially exothermic curing process, high internal stresses (see: [[Tensile Test Residual Stresses Orientations|tensile test residual stresses orientations]]) or discoloration may occur in some areas as a result of thermal stress.

==Fibre-reinforced plastics with thermosetting matrix==

Due to these properties, these [[Plastics|plastics]] are either extended with inorganic fillers or reinforced with various fibers (glass fibers, carbon fibers, mineral fibers, aramid or natural fibers) for economic and design reasons (see: [[Fibre-reinforced Plastics|fiber-reinforced plastics]]), which significantly changes their [[Strength|strength]], impact toughness, and elongation at break. Filling or reinforcement levels of up to 70 m.-% can be achieved (globtops in microelectronics, car body and aircraft construction). The specific strengths or moduli can reach higher values than those of metallic materials. At the same time, this reduces the formation of [[Tensile Test Residual Stresses Orientations|residual stress]]), although the [[Anisotropy|anisotropy]] of the properties can increase significantly, particularly in the case of reinforcement (glass or carbon fleece, glass fabric, GF or CF mats, and rovings).

The most important thermosetting plastics used in technical applications are epoxy and polyester resins, amino and phenolic resins, melamine resins, polyurethanes, and cross-linked polyacrylates, although some biopolymers can also be classified in this material group alongside silicones.

Thermosetting plastics are usually produced using a polycondensation process, in which the [[Polymer|polymer]] chains are cross-linked by heat, irradiation, or chemical additives (hardeners). With the aid of catalysts or thermal activation, linear macromolecules are first formed, which then form a mechanically and thermally stable superstructure through three-dimensional cross-linking.

Today, the manufacturing processes for [[Plastic Component|plastic components]] range from hand lay-up to pressing and injection molding to the prepreg process and injection molding.

==See also==

* [[Plastics]]
* [[Polymer]]
* [[Polymer Blend|Polymer blend]]
* [[Thermoplastic Material|Thermoplastic material]]
* [[Elastomers]]

'''References'''

{|
|-valign="top"
|[1]
|[[Altstädt, Volker|Altstädt, V.]]: Testing of Composite Materials. In: [[Grellmann, Wolfgang|Grellmann, W.]], [[Seidler, Sabine|Seidler, S.]] (Eds.): Polymer Testing. Carl Hanser, Munich (2022) 3rd Edition, pp. 515–567 (ISBN 978-1-56990-806-8; E-Book: ISBN 978-1-56990-807-5; see [[AMK-Büchersammlung|AMK-Library]] under A 22)
|-valign="top"
|[2]
|Elsner, P., [https://de.wikipedia.org/wiki/Peter_Eyerer Eyerer, P.], https://de.wikipedia.org/wiki/Peter_Eyerer Hirth, T. (Eds.): Domininghaus – Kunststoffe, Eigenschaften und Anwendungen. Springer, Berlin (2012) 8th new revised and expanded Edition, (ISBN 978-3-642-16172-8; see [[AMK-Büchersammlung|AMK-Library]] under G 4))
|-valign="top"
|[3]
|Schürmann, H.: Konstruieren mit Faser-Kunststoff-Verbunden. Springer, Berlin (2007) 2nd Edition (ISBN 978-3-540-72190-1)
|-valign="top"
|[4]
|[https://de.wikipedia.org/wiki/Manfred_Neitzel Neitzel, M.], Mitschang, P., Breuer, U.: Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. Carl Hanser, Munich (2014), (ISBN 3-446-22041-0; see [[AMK-Büchersammlung|AMK-Library]] under G 12)
|-valign="top"
|[5]
|[[Ehrenstein, Gottfried W.|Ehrenstein, G. W.]]: Faserverbund-Kunststoffe. Carl Hanser, Munich (2006) 2nd Edition, (ISBN 978-3-446-22716-3; see [[AMK-Büchersammlung|AMK-Library]] under G 6-2)
|-valign="top"
|[6]
|Erhard, G.: Konstruieren mit Kunststoffen. Carl Hanser, Munich (2008) 4th Edition (ISBN 978-3-446-41646-8; see [[AMK-Büchersammlung|AMK-Library]] under G 59)
|-valign="top"
|[7]
|Ehrenstein, G. W.: Mit Kunststoffen konstruieren. 3rd Edition, Carl Hanser, Munich (2007), (ISBN 978-3-446-41322-1; see [[AMK-Büchersammlung|AMK-Library]] under G 42)
|-valign="top"
|[8]
|Ehrenstein, G. W.: Polymerwerkstoffe – Struktur – Eigenschaften – Anwendung. Carl Hanser, Munich (2011) 3rd Edition (ISBN 978-3-446-42283-4; see [[AMK-Büchersammlung|AMK-Library]] under G 91)
|}

[[Category:Plastics]]

Thermosets - Revision history